MediaLight Mk2 v2 (2024 New Version) Flicker-Free Dimmable A19 Bulb
by Scenic Labs
Original price
$34.95
-
Original price
$644.95
Original price
$34.95
$59.95
$59.95
-
$644.95
Current price
$59.95
- Description
- Features
- Nitpicky details
The MediaLight Mk2 v2 Flicker-Free Dimmable Bulb is designed to comply with SMPTE Standard ST 2080-3:2017 ‘Reference Viewing Environment for Evaluation HDTV Images.’
Featuring the refined Mk2 v2 chip and an upgraded driver for smoother dimming support across a wide range of TRIAC dimmers, the dimmable MediaLight Mk2 offers uncompromising accuracy for your home theater and is the perfect addition to your grading suite.
- High-accuracy 6500K CCT (Correlated Color Temperature)
- Color Rendering Index (CRI) ≥ 98 Ra (TLCI 99)
- Color-stable dimming and instant warmup
- Flicker-free dimming
- Optimized for Lutron dimmers and TRIAC dimmers*
- 8 watts 110v AC 60Hz (50Hz for 220v)
- 800 Lumens
- 3 Year Limited Warranty
- 120° beam angle
- California Title 20 Compliant (E26/110v only)
- RoHS Certified
The MediaLight Mk2 Bulb is no ordinary bulb. It does not use a cheap COB light source. It contains 32 individual Colorgrade Mk2 chips (more than the 1m MediaLight Mk2 Eclipse, but with identical spectral power distribution) and, unlike COB lightbulbs, it does not require up to 15 minutes to reach target color temperature. This is what we mean by instant warmup.
The MediaLight Bulb is constructed differently from most bulbs and may operate differently with your existing dimmer. It is optimized for TRIAC dimmers. We recommend Lutron LED dimmers because they offer a trim adjustment switch that allows for full and accurate control of dimming range. And the good news is that Lutron dimmers are very reasonably priced. In most cases, other dimmers will be just fine, but you may notice the following issues:
- Smaller amount of dimming range (Typically 70-90% range vs. 100% with incandescent). It may not go as low or as high.
- LED Bulbs may not shut off at lowest dim setting: this is caused by the dimmer thinking the bulb is completely off due to the low amount of wattage an LED consumes.
- On dimming systems based on X10 or Power Line Carrier (PLC) control technology, LEDs may flicker when modules are communicating due to the small fluctuations in power on the line.
It is suggested that you test your current dimmers to see if they work with the MediaLight Bulbs that you have purchased. Chances are that they will work fine. If not, the problem will be resolved by buying a dimmer listed below:
Lutron MS-OPS2
Lutron MACL-153M
Lutron PD-6WCL
Lutron S-600P-WH
Lutron CTCL-153P-WH
Levition TTI06-1 NG
Lutron MRF2-6ND-120-WH
Levition 1D4402
Levition 1C2505
Lutron SCL-153P
Lutron SCL-153PH
Lutron LGCL-153P
Lutron LGL-153PLH
Levition N0.6641
Levition N0.6161
Levition N0.6631
Levition N0.6681
Lutron MACL-153MH-WH
Levition N0.6633
Lutron DVW-603PGH-WH-C
Also any of the Lutron Caseta dimmers. As long as there is a low-end trim, it will work without instability or sudden drop-off on the lower settings.